Wallpaper embossing machine ammeter and power output

- Apr 26, 2019-

The current meter of the wallpaper embossing machine mainly refers to the working current of the ultrasonic wave during the process of use, and indicates the resonance state of the welding head and the system during the no-load operation during operation, generally 0.4 to 0.6 A, depending on the output power. When loading, it depends on the pressing area and the flower wheel and the complexity and size, usually from 1.0 to 2.5A.

Wallpaper embossing machine power output

The wallpaper embossing machine needs to adjust the output power when working. When it is adjusted to different file positions during operation, the ammeter reading will change, and the height of the flower wheel will be adjusted. The higher the number, the faster the speed, and the faster the speed; otherwise the speed is reduced.

The embossing machine of the wallpaper adjusts the speed of the ultrasonic steel mold. The higher the number, the faster the speed is; the lower the speed. When hitting the automatic gear position, the flower wheel and the steel mold automatically run; when the manual switch is turned on, the operation of the flower wheel and the steel mold is controlled by the foot pedal of the right foot, and the pedal flower wheel and the steel mold are started to work, and the steel plate is released. The pedal flower wheel and steel mold stop working.

The red indicator light of the wallpaper embossing machine is on, indicating that the device is overloaded. At this point, you should stop immediately and check the cause until the fault is removed before you can continue working. Adjust the resonance state between the ultrasonic vibrator and the steel mold. Turn the knob clockwise or counterclockwise, the amplitude meter reading will change, as described above, the normal reading is generally within 50.www.embochina.com