Three-roll embossing machine installation and use advantages

- Sep 03, 2018-

The three-roll embossing machine has many advantages in the process of use, the product is not peeling, breathable, wear-resistant, environmentally friendly, leather feel, and comfortable. Imitation leather microfiber fabric is a kind of fabric, but its leather material feels and visually superior to PU, PVC, and is much cheaper than leather.

Three-roll embossing machine installation

1. Disassemble the package, check the surface and parts of the equipment for damage during the operation, check whether the screw is loose, whether the electrical connector is locked, and whether the accessories are complete.

2. The equipment should be placed on a flat hard ground, requiring the lace machine to be at least 0.5 m away from the heat source, and to ensure that the lace machine has at least 1 m before and after, and at least 0.5 m space left and right for operation.

3. Check the voltage requirements on the back of the vibration box and ensure that the system is well grounded.

4. Connect the device to the power supply and air supply. Be sure to turn off the power switch first. Pay attention to the voltage requirements of this unit: AC220V, 50-60Hz

5. The air line is connected to a clean, non-lubricated compressed air source with a rated working pressure of 0.6 MPa.

http://www.embochina.com/