PU leather embossing machine installation and use requirements

- May 12, 2019-

PU leather embossing machine is mainly used for embossing, foaming, crimping and pressing trademarks on various fabrics. It can also be used for pressing trademarks on non-woven fabrics, coatings, human leather, paper and aluminum panels. Leather pattern and various shades of flowers and patterns.

PU leather embossing machine installation

1. Disassemble the package, check the surface and parts of the equipment for signs of damage, check whether the screws are loose, the electrical connectors are locked, and the accessories are complete.

2. The equipment should be placed on a flat hard ground, requiring the lace machine to be at least 0.5 m away from the heat source, and to ensure that the lace machine has at least 1 m before and after, and at least 0.5 m space left and right for operation.

3. Check the voltage requirements on the back of the vibration box and ensure that the system is well grounded.

4. Connect the device to the power and air supply. Be sure to turn off the power switch first. Pay attention to the voltage requirements of this unit: AC220V, 50-60Hz

5. The air line is connected to a clean, non-lubricated source of compressed air at a rated working pressure of 0.6 MPa.www.embochina.com