Ultrasonic fabric embossing machine is mainly used for embossing, foaming, crimping and pressing trademarks on various fabrics, as well as pressing trademarks on non-woven fabrics, coatings, human leather, paper and aluminum plates, artificial leather patterns and Light shades and patterns. It is an efficient suture and embossing device.
Ultrasonic fabric embossing machine is mainly used for seaming, welding, fusion cutting, embossing of synthetic fiber fabrics. The processed products have good water tightness, high production efficiency, no needle thread accessories, smooth cut surface without burrs, good hand feeling, etc. Widely used in clothing, toys, food, environmentally friendly non-woven bags, masks and other industries.
Ultrasonic fabric embossing machine should be disassembled before installation, check the surface and parts of the equipment for signs of damage, check whether the screws are loose, whether the electrical connectors are locked, and whether the accessories are complete. Then place it on a flat hard floor, requiring the lace machine to be at least 0.5 m away from the heat source, and make sure that the lace machine has at least 1 m in front of and behind, and at least 0.5 m of space on the left and right for operation.
Then check the voltage requirements on the back of the vibration box of the ultrasonic fabric embossing machine and ensure that the system is well grounded. Connect the equipment to the power supply and air supply. Be sure to turn off the power switch first. At the same time, the air line is connected to a clean and non-lubricated compressed air source with a rated working pressure of 0.6 MPa.