Overload indication and sound wave adjustment of non-woven fabric calender machine

- May 24, 2019-

The upper mold speed of the non-woven fabric calender machine is adjusted to the height of the flower wheel when it is used. The higher the number, the faster the rotation speed, the faster the speed, and the lower the speed. The lower mold speed of the non-woven calender is adjusted to the speed of the ultrasonic steel mold. High and low. The higher the digit, the faster the speed, and vice versa.

Manual/automatic switch for non-woven fabric calender machine

The non-woven fabric calender machine is driven to the automatic gear position, the flower wheel and the steel mold are automatically operated; when the manual switch is turned on, the operation of the flower wheel and the steel mold is controlled by the pedal of the right foot, stepping on the pedal flower wheel and steel When the mold starts working, the pedal flower wheel and the steel mold are released and the operation stops.

Overload indication of non-woven fabric calender machine

The red indicator light is on, indicating that the device is overloaded. At this point, you should stop immediately and check the cause until the fault is removed before you can continue working.

Sound wave adjustment of non-woven fabric calender machine

Adjust the resonance state between the ultrasonic vibrator and the steel mold. Turn the knob clockwise or counterclockwise, the amplitude meter reading will change, as described above, the normal reading is generally within 50.www.embochina.com