Overload indication and sound wave adjustment of sofa and curtain fabric embossing machine

- Sep 21, 2018-

The sofa and curtain fabric embossing machine hits the automatic gear position during the operation. The flower wheel and the steel mold automatically run, and the manual switch is turned on. The operation of the flower wheel and the steel mold is controlled by the foot pedal of the right foot. The lower pedal flower wheel and the steel mold start to work, and the pedal flower wheel and the steel mold are released to stop the operation.

The red indicator light of the sofa and curtain fabric embossing machine is bright, which indicates that the equipment is overloaded to a certain extent. At this time, it is necessary to stop immediately. Check the cause and wait for the fault to be removed before continuing to work, adjusting the ultrasonic vibrator and the steel mold. The state of resonance. Turn the knob clockwise or counterclockwise, the amplitude meter reading will change, as described above, the normal reading is generally within 50.

Sonic test of sofa and curtain fabric embossing machine

The function of the sofa and curtain fabric embossing machine is to test whether the ultrasonic wave is normal. When the operation is performed, the sound wave test switch needs to be pressed for 1 to 2 seconds to see if the overload indicator light is on, and whether the amplitude meter and the ammeter reading are within the normal range.