Characteristics and operation process of Two-roller bubble embossing machine

- Oct 16, 2018-

The Two-roller bubble embossing machine adopts the cylinder as the execution power component, and the movement is reliable and stable; because the working process is not stamped, the working efficiency, the processing quality, and the life of the mold can be greatly improved. The two-hand button works, and the foot switch is used alternately to ensure safe and continuous work.

 

Two-roller bubble embossing machine is mainly used for embossing of various fabrics, artificial leather, leather and other materials. It is suitable for shoes, hats, gloves, leather garments, luggage, car seat cushions, toys and other industries. The Two-roller bubble embossing machine checks the amount of hydraulic oil before use. The height of the hydraulic oil is 2/3 of the height of the lower base. When the oil quantity is insufficient, it should be added in time. The oil must be finely filtered before being injected. Add pure 20# hydraulic oil to the oil hole of the lower base. The height of the oil level is seen by the oil standard rod, which is generally added to the height of 2/3 of the lower base.

 

When theTwo-roller bubble embossing machine is running, it is necessary to first turn on the three-phase power main switch of the embossing machine, and then turn on the power switch on the control box of the machine side. If there is a high-cycle switch, temporarily do not hit it, and then put on the electric power switch. At this point, both the vacuum tube and the hot mold begin to warm up. The lower mold is supplemented with insulation, the upper part is mounted on the upper mold, the test mode switch is pressed, and the upper and lower mold joint positions are started. If the lower joint is poor, the lower mold is moved. If the level is not matched, the four pillars of the upper mold are adjusted. .