Basic requirements and automated production of textile cotton roller

- Apr 28, 2019-

The woven cotton roller effectively realizes continuous and automatic production in the process of operation, and the purpose of the cotton drying is to prevent the excessive moisture of the seed cotton and cause poor rolling. When the moisture content of the seed cotton exceeds 12%, drying equipment is required to remove excess water. The purpose of cleaning cotton is to remove the external impurities (leaves, bells, sand, ropes, cloth, etc.) in the seed cotton, to avoid the mixing of coarse and hard impurities into the fiber or to be crushed, which is more suitable for machine picking with higher impurity content. It is important. The purpose of stripping is to peel off the fibers remaining on the cottonseed. The short fibers peeled off by the stripping machine are called lint, also known as cotton linters.


Basic requirements for textile cotton roller


1. The textile cotton roller can effectively protect the original quality of the fiber during the process of use. The natural characteristics and length, capacity, maturity and color of the cotton fiber determine the corresponding spinning value. Therefore, seed cotton of different varieties, different grades and different lengths cannot be mixed and processed. The woven cotton roller should minimize the rolling of the fiber, the crushing of the cottonseed and the large amount of the cotton linters into the lint, especially to prevent the occurrence of defects such as neps.


2. Remove impurities from the fibers.


3. Packed and batched according to different varieties and grades.